Home
Contact
Site Map
Home| Products Category |
| Contact Info |
|
JIAXING SUNNY FRP INDUSTRIES CO.,LTD Tel: +86 573 82936800 Fax: +86 573 82715873 Key Contact: Mr. Wang Wangjianyang@vip.sina.com |
Your are here  Home Products Show |
Total 49 Products | 1 - 20
Adhesive backed Nylon peel ply - 7003
A removale outside fabric ply molded onto the surface of a laminate to provide a chemically clean surface for bonding when it is removed. The nylon peel ply can reduce or eliminate the need to sand or...
Carbon fiber reinfforced exhaust pipe/trmp4 - 6004
Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯rement...
Woven roving combo mat - 3005
Combo mat is made by woven roving and chopped fiberglass, which is widely used in FRP boat, automotive parts, laminating panel etc. The area weight of woven roving is from 400-800g/sq.mtre,The area we...
FRP Pultruded Grating - 1202
Pultruded FRP Grating is made of type I or T pultruded bearing bars and processed sheet-like material with many blanks. It has not only the same chemical resistant properties as molded grating,but al...
FRP Mold Grating - 1201
Molded FRP Grating are plate-like products consisting of regular meshes, which is made with hard-laid fiberglass reinforcement and cast up unsaturated polyester resin or vinyl ester resin.The symmetri...
camaera trmp4 - 6003
Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯uireme...
Exhaustation pipe - 6002
Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯uireme...
PET film - 7002
polyester film is release film for FRP demould.It can used in filament pipe,compression mould etc system.Product characteristics:Transfiguration symmertrical after be heated.Goood thermal resistance.G...
Laminated Products for Insulation - 9005
Laminated products is divided into four series as follows: Various phenolic resin paper plate, pipes and rod. Modify epoxy phenolic resin fiberglass plate, pipe and rod. ...
Self-adhesive alkali-resistant fiberglass adhesive - 3004
Non-drying fiberglass alkaline-resistant fiberglass adhesive tape is on the basis of C-glass or E-glass fabric treated by acrylic copolymer solution and covered with non-drying acrylic colloid ad...
Direct Roving - 1001
E-glass direct roving is produced directly from a 2000 tips or a 4000 tips bushing by directly winding a certain number of fiber without twist. It is coated with silane compatible with polyester, viny...
Assembled roving for filament winding - 1002
Assembled roving for filament winding is specially designed as reinforcements for the thermoset resin used in filament winding processes. It is coated with silane and compatible with unsaturated p...
Assembled roving for pultrusion - 1003
Assembled roving for pultrusion is specially designed as reinforcements for thermoset resin used in pultrusion. It is coated with silane and compatible with unsaturated polyester, vinyl ester resins a...
spray-up roving - 1004
Spray up roving is specially designed to achieve excellent performance for spray-up process. It is treated with silane-based size and compatible with unsaturated polyester and vinyl ester resin.The en...
CHOP Roving for pipe - 1005
Chop roving is specially design to achieve excellent performance for pipe. It is treated with silane-base size and compatible with unsaturated polyester and vinyl ester resin.The end product is GRP pi...
Roving for SMC - 1006
Roving for SMC is designed as reinforcements for the thermoset resin used in SMC. It is treated with special silane size and compatible with polyester resin, vinyl ester resin.The end products are au...
Roving for SMC - 1007
Roving for chopped strand mat are specially designed to produce powder chopped strand mat and emulsion chopped strand mat, rang from 100g/m2 to 900g/ m2 . The product is compatible with unsaturated ...
Roving for centrifugal casting - 1008
Roving for centrifugal casting is designed for HOBAS products. The products is treated with special silane-base and compatible with unsaturated polyester, vinyl ester resins.The typical end products i...
Roving for texturizing - 1009
Roving for texturizing is designed to produce texturized roving. It is treated with silane and compatible with unsaturated polyester, phenolic resin, vinyl ester resin.The typical product are friction...
Roving for panel - 1010
Roving for panel is specially designed for continous panel molding process. It is treated with silane-based size and compatible with unsaturated and vinyl ester resin.The typical end products are pan...
1 | 2 | 3 | Next
Adhesive backed Nylon peel ply - 7003A removale outside fabric ply molded onto the surface of a laminate to provide a chemically clean surface for bonding when it is removed. The nylon peel ply can reduce or eliminate the need to sand or...
Carbon fiber reinfforced exhaust pipe/trmp4 - 6004Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯rement...
Woven roving combo mat - 3005Combo mat is made by woven roving and chopped fiberglass, which is widely used in FRP boat, automotive parts, laminating panel etc. The area weight of woven roving is from 400-800g/sq.mtre,The area we...
FRP Pultruded Grating - 1202Pultruded FRP Grating is made of type I or T pultruded bearing bars and processed sheet-like material with many blanks. It has not only the same chemical resistant properties as molded grating,but al...
FRP Mold Grating - 1201Molded FRP Grating are plate-like products consisting of regular meshes, which is made with hard-laid fiberglass reinforcement and cast up unsaturated polyester resin or vinyl ester resin.The symmetri...
camaera trmp4 - 6003Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯uireme...
Exhaustation pipe - 6002Carbon fiber reinforced plastics is produced by filament winding ,pultrusion, rolling, compression molding,injection etc process system.We can design and produce the CFRP according to customer¡¯uireme...
PET film - 7002polyester film is release film for FRP demould.It can used in filament pipe,compression mould etc system.Product characteristics:Transfiguration symmertrical after be heated.Goood thermal resistance.G...
Laminated Products for Insulation - 9005Laminated products is divided into four series as follows: Various phenolic resin paper plate, pipes and rod. Modify epoxy phenolic resin fiberglass plate, pipe and rod. ...
Self-adhesive alkali-resistant fiberglass adhesive - 3004Non-drying fiberglass alkaline-resistant fiberglass adhesive tape is on the basis of C-glass or E-glass fabric treated by acrylic copolymer solution and covered with non-drying acrylic colloid ad...
Direct Roving - 1001E-glass direct roving is produced directly from a 2000 tips or a 4000 tips bushing by directly winding a certain number of fiber without twist. It is coated with silane compatible with polyester, viny...
Assembled roving for filament winding - 1002Assembled roving for filament winding is specially designed as reinforcements for the thermoset resin used in filament winding processes. It is coated with silane and compatible with unsaturated p...
Assembled roving for pultrusion - 1003Assembled roving for pultrusion is specially designed as reinforcements for thermoset resin used in pultrusion. It is coated with silane and compatible with unsaturated polyester, vinyl ester resins a...
spray-up roving - 1004Spray up roving is specially designed to achieve excellent performance for spray-up process. It is treated with silane-based size and compatible with unsaturated polyester and vinyl ester resin.The en...
CHOP Roving for pipe - 1005Chop roving is specially design to achieve excellent performance for pipe. It is treated with silane-base size and compatible with unsaturated polyester and vinyl ester resin.The end product is GRP pi...
Roving for SMC - 1006Roving for SMC is designed as reinforcements for the thermoset resin used in SMC. It is treated with special silane size and compatible with polyester resin, vinyl ester resin.The end products are au...
Roving for SMC - 1007Roving for chopped strand mat are specially designed to produce powder chopped strand mat and emulsion chopped strand mat, rang from 100g/m2 to 900g/ m2 . The product is compatible with unsaturated ...
Roving for centrifugal casting - 1008Roving for centrifugal casting is designed for HOBAS products. The products is treated with special silane-base and compatible with unsaturated polyester, vinyl ester resins.The typical end products i...
Roving for texturizing - 1009 Roving for texturizing is designed to produce texturized roving. It is treated with silane and compatible with unsaturated polyester, phenolic resin, vinyl ester resin.The typical product are friction...
Roving for panel - 1010Roving for panel is specially designed for continous panel molding process. It is treated with silane-based size and compatible with unsaturated and vinyl ester resin.The typical end products are pan...
1 | 2 | 3 | Next
Chinese
English
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian
By Supplierlist.com